USED GOOD CONDITION - Insteon 2476S SwitchLinc Relay - INSTEON Remote Control On/Off Switch (Non-Dimming) White

Sale price $20.00 Regular price $49.99

Description

INSTEON SwitchLinc Relay (Non-dimming) - The Most Advanced Remote-Controllable On/Off Switch

Fill your entire home with personalized mood lighting for any occasion. The Non-Dimming INSTEON SwitchLinc Relay allows you to include fluorescent or non-dimmable lights, fans, and other appliances in your INSTEON network. The SwitchLinc Relay is made to run silently no matter what kind of device you connect to it. The SwitchLinc Relay functions only as an on/off switch.

Features & Benefits

  • Controls any load type, such as fluorescent lights, fans, and motors!
  • Create elegant whole-house lighting scenes in minutes
  • Quiet - 80% quieter than traditional relay switches
  • A great low-cost investment for any home
  • Award-winning INSTEON technology: the ultimate in simplicity and reliability
Manufacturer Product No. 2476S, INSTEON Non-Dimming INSTEON SwitchLinc Relay
UPC 891114000099
Color White
Warranty 2 years, limited
LED Indicator 8 White LEDs, Optional Green, Blue, Amber, or Red with #2400L kit
Operation Modes INSTEON only, X10 only, INSTEON and X10 Combo Mode
Combo Mode Message Order INSTEON, X10, INSTEON cleanup
Multi-Way Circuit Support One SwitchLinc Dimmer controls load, Cross-Link any number of SwitchLinc Relays or other INSTEON Controllers
Setup Memory Non-volatile EEPROM
Addresses 1 hard-coded out of 16,777,216 possible
Links 417
Powerline Frequency 131.65 KHz
Minimum Transmit Level 3.2 Vpp into 5 Ohms
Minimum Receive Level 10 mV
Messages Repeated Yes
Paddle Type True rocker action
Wire Nuts 4 included
Mounting Mounts in single or multiple-ganged junction box
Operating Conditions Indoors, 40 to 104°F, up to 85% relative humidity
Dimensions 4.1" H x 1.8" W x 1.2" D
Weight 3.6 oz
Supply Voltage 120 Volts AC +/- 10%, 60 Hertz, single phase
Surge Protection MOV rated for 150 Volts
Neutral Wire Required
Maximum Amps: 15 Amps
Power Wire Leads 6", 16 AWG, stranded, 600V, 105°C insulation, ends stripped and tinned, LINE (black), LOAD (red), NEUTRAL (white)
Load Types Wired-in incandescent lighting and inductive loads
Ground Lead 6", 18 AWG, stranded, bare copper
Maximum Load 480 Watts (for incandescent loads)
Certification Safety tested for use in USA and Canada (ETL #3017581)
X10 Primary Address 1 optional (comes unassigned)
X10 Status Response Supported
X10 Powerline Frequency 120 KHz
X10 Minimum Transmit Level 3.2 Vpp into 5 Ohms
X10 Minimum Receive Level 20mV into 5 Ohms
X10 Messages Repeated No