Description
INSTEON SwitchLinc Relay (Non-dimming) - The Most Advanced Remote-Controllable On/Off Switch
Fill your entire home with personalized mood lighting for any occasion. The Non-Dimming INSTEON SwitchLinc Relay allows you to include fluorescent or non-dimmable lights, fans, and other appliances in your INSTEON network. The SwitchLinc Relay is made to run silently no matter what kind of device you connect to it. The SwitchLinc Relay functions only as an on/off switch.
Features & Benefits
- Controls any load type, such as fluorescent lights, fans, and motors!
- Create elegant whole-house lighting scenes in minutes
- Quiet - 80% quieter than traditional relay switches
- A great low-cost investment for any home
- Award-winning INSTEON technology: the ultimate in simplicity and reliability
| Manufacturer Product No. | 2476S, INSTEON Non-Dimming INSTEON SwitchLinc Relay |
| UPC | 891114000099 |
| Color | White |
| Warranty | 2 years, limited |
| LED Indicator | 8 White LEDs, Optional Green, Blue, Amber, or Red with #2400L kit |
| Operation Modes | INSTEON only, X10 only, INSTEON and X10 Combo Mode |
| Combo Mode Message Order | INSTEON, X10, INSTEON cleanup |
| Multi-Way Circuit Support | One SwitchLinc Dimmer controls load, Cross-Link any number of SwitchLinc Relays or other INSTEON Controllers |
| Setup Memory | Non-volatile EEPROM |
| Addresses | 1 hard-coded out of 16,777,216 possible |
| Links | 417 |
| Powerline Frequency | 131.65 KHz |
| Minimum Transmit Level | 3.2 Vpp into 5 Ohms |
| Minimum Receive Level | 10 mV |
| Messages Repeated | Yes |
| Paddle Type | True rocker action |
| Wire Nuts | 4 included |
| Mounting | Mounts in single or multiple-ganged junction box |
| Operating Conditions | Indoors, 40 to 104°F, up to 85% relative humidity |
| Dimensions | 4.1" H x 1.8" W x 1.2" D |
| Weight | 3.6 oz |
| Supply Voltage | 120 Volts AC +/- 10%, 60 Hertz, single phase |
| Surge Protection | MOV rated for 150 Volts |
| Neutral Wire | Required |
| Maximum Amps: | 15 Amps |
| Power Wire Leads | 6", 16 AWG, stranded, 600V, 105°C insulation, ends stripped and tinned, LINE (black), LOAD (red), NEUTRAL (white) |
| Load Types | Wired-in incandescent lighting and inductive loads |
| Ground Lead | 6", 18 AWG, stranded, bare copper |
| Maximum Load | 480 Watts (for incandescent loads) |
| Certification | Safety tested for use in USA and Canada (ETL #3017581) |
| X10 Primary Address | 1 optional (comes unassigned) |
| X10 Status Response | Supported |
| X10 Powerline Frequency | 120 KHz |
| X10 Minimum Transmit Level | 3.2 Vpp into 5 Ohms |
| X10 Minimum Receive Level | 20mV into 5 Ohms |
| X10 Messages Repeated | No |
You might also like
Sale price
$49.00
Regular price
$79.99
— Sold Out
Sale price
$29.00
Regular price
$54.95
— Sold Out
Sale price
$60.00
Regular price
$97.97
